7 HOMEDEPOT.com
Please contact 1-844-548-3776 for further assistance.
Installation (continued)
4
Making the electrical
connections
Wall Mount
□
Place rubber grommet (CC) into the hole of
the wire cover plate before threading wires
through.
□
Thread the wires through the hole in the
wire cover plate (C) before making wiring
connections.
Wall and Extension Arm Mount
Electrical Wiring
□
If necessary, strip 3/8 in. of insulation from the
junction box or fixture (A) wires.
□
Connect the fixture black wire to the supply
black wire ((+) line), and fixture white wire to
the supply white wire ((-) common) by twisting
the exposed wires together and using the wire
nuts (BB). Ensure there are no loose wires.
□
Connect the supply ground wire to the green
fixture ground wire by twisting the exposed
wires together and using the wire nuts (BB).
NOTE:
Hold stripped ends near each other and align any
frayed strands (do not twist wires).
Push the wires into wire nut (BB) and use your fingers to
twist the wire nut clockwise until tight. Check for tightness
by pulling wires.
(+) Line
Black
White
Lighting
Fixture
Green
(-) Common
Ground
3/8 in.
BB
CC
C
D
5
Securing the fixture and wiring
Wall Mount
□
Once the fixture is wired, place the wire cover
plate (C) on the arm (D) by tightening the two
screws removed earlier.
Extension Arm Mount
□
After wiring is complete, secure the fixture on
the extension arm by tightening the screws
removed earlier.
Extension Arm Mount
Wall Mount
C
D
D
