8
Installation (continued)
8
Installing bulbs and adjusting
the light heads
□
After the fixture is securely mounted, install
two PAR38 bulbs up to 150 Watts each (sold
separately) into the lamp heads.
□
Loosen the thumb screw (1), then use your
hand to pan and tilt each individual light head
on the fixture (A) to point towards the direction
desired. Tighen the screws under each lamp
head to fix the desired angle.
□
From the breaker and switch, turn power back
ON to the light fixture to check if the lights
work. Make sure the photocell (B) has no light
entering it when testing.
IMPORTANT:
PAR38 bulbs are sold separately. If you
need to purchase please contact your retail store.
WARNING:
Do not use higher wattage than 150W
halogen bulbs (or comparable lumen output LED bulbs)
per head.
WARNING:
Risk of fire. Keep the lamp heads at least 12
in. from combustible materials.
CAUTION:
Keep lamp heads 30° below horizontal to
prevent water damage and electrical shock.
A
B
1
