commend.com
OD10 TD CM
TE
|
1
Security and Communication
The design and/or specifications of products may be subject to change for improvement without prior notice. Errors excepted.
OD10 TD CM
DATA SHEET V1.3/0522
Extent of supply
– Intercom station
– Cleaning cloth
– I/O plug
– Cat. 6 patch cable (0.3 m/12 in)
– TX 08 screwdriver
– Claiming code
– Short reference
Technical specifications
Technical data
IP rating:
IP65 (acc. to EN 60529)
Mechanical impact resistance:
IK07 (acc. to EN 62262)
Salt spray test:
672 h (acc. to IEC 60068-2-11/EN 9227)
Front panel:
hardened glass, AG85, 3 mm (0.12 in)
Microphone:
two digital MEMS microphones
Loudspeaker:
special membrane type for optimal sound quality, 2 x 8 Ω
Amplifier:
integrated class-D amplifier with 10 W
Sound pressure level:
max. 99 dB
Display:
10.1˝ touch display (IPS-TFT)
resolution: 800 x 1280 pixels
luminance: typ. 1000 cd/m
2
Inputs:
3 inputs for floating contacts
(switches, push buttons, relay outputs etc.)
1)
Outputs:
2 relay outputs
max. switching voltage: 60 VDC, 30 VAC
peak
2
max. switching current (per output): 2 A
max. switching power (per output):
60 W (DC), 37.5 (VA AC)
electrical expected life:
min. 5 x 10
5
(30 VDC/2 A), min. 2 x 10
5
(30 VDC/1 A)
Audio bandwidth:
up to 20 kHz
Audio codecs:
Opus, G.722, G.711 a-law and G.711 u-law
Video features:
codecs: H.264 (SIP video and ONVIF),
MJPEG (HTTP video and ONVIF) and RTSP
ONVIF specification: ONVIF Profile S
IT security:
SIP over TLS, SRTP, IEEE 802.1X, MJPEG via HTTPS,
HTTPS for accessing the web interface and interfaces
Protocols:
IPv4, IPv6, TLS, TCP, UDP, HTTP (RFC 2617, RFC 3310),
HTTPS (RFC 2818), RTP (RFC 3550), 802.1x EAP-TLS
(RFC 5216), 802.1x EAP-MD5 (RFC 2284), RTCP, RTSP
(RFC 2326), DHCP, DHCPv6, SDP (RFC 2327, RFC 4566),
SSDP, SIP (RFC 3261), SIP over TLS, SNMPv2c, STUN
(classicstun), SMTP, DTMF Decoding (RFC 2976,
RFC 2833, SIP Info), ICMPv6 (Router discovery),
MQTT (ISO/IEC 20922)
Operating temperature range:
–25 °C to +55 °C (–13 °F to +131 °F)
Storage temperature range:
–25 °C to +65 °C (–13 °F to +149 °F)
Relative humidity:
up to 95%, not condensing
Connection:
RJ45 jack for Ethernet and PoE (10/100 Mbit/s)
2 x 2.0 USB (Type A) for external devices
3)
Power supply
4)
:
PoE+: IEEE 802.3at/Class 4
Cabling:
min. Cat. 5, shielded
5)
Approvals and compliances:
EN 61000-6-2, EN 61000-6-3, EN 55032 Class B,
EN 55024, EN 60529 IP65, EN 62262 IK07,
IEC 60068-2-11, EN 62368-1
Wall mounting:
drywall/panel mount kit OD10 FB
flush mount box OD10 FBS (requires OD10 FB)
surface mount kit OD10 SH
Dimensions (H x W x D):
with flush mount kit:
326 x 174 x 20 mm (12.83 x 6.85 x 0.79 in)
with surface mount kit:
326 x 174 x 43 mm (12.83 x 6.85 x 1.69 in)
Weight incl. packaging:
approx. 3,000 g (6.61 lbs)
Technical data camera
Image sensor:
1/3˝ RGB CMOS
Lens:
F2.4, fixed aperture,
150° diagonal angle,
145° horizontal angle,
123° vertical angle
Minimum illumination:
B/W: 1 lux, colour: 1.5 lux
Resolution (W x H):
1280 x 960 pixels
Frame rate:
up to 30 fps
Video streaming:
up to 6 HTTP video streams simultaneously
Access
The device can be accessed through IPv4 (DHCP), IPv6 (link-local) and zero-
conf. For information on accessing the web interface, see the product manual.
Optional accessories:
AFIL-USB (induction loop kit)
EB1E1A (USB I/O module)
EB3E2A-AUD (expansion module)
IP Secure Connector (safety switch box)
PA 25W POE-DC (power injector)
RJ45-MONT (Ethernet socket)
1)
For the switching positing “ON”, the switch resistance has to be less than 1 kΩ.
2)
The relay output may only be connected to an ES1 or a SELV circuit! An ES1 circuit as per IEC/EN/
UL 62368-1 or a SELV circuit as per IEC/EN 60950-1 must be separated safely from a dangerous
electrical circuit (e.g. 230 V or 110 V mains power), e.g. by means of double insulation. The ES1 or
SELV circuit must not exceed 60 VDC or 42.4 VAC
peak
(30 VAC
eff
)!
3)
The USB connections are only intended for use with Commend devices. Do not use the USB jacks
e.g. to charge mobile phones.
If a USB device should be installed separately using a USB extension cable, the USB cable length
must not exceed 3 m. In addition to that, it is recommended to attach a ferrite to a USB cable with
a length of 1 m or more.
4)
For power supply, a PoE switch or PoE injector is required (not included in extent of supply), e.g.
IP Secure Connector.
5)
The maximum line length of Cat. cabling in a LAN is 100 m (328 ft) – e.g. from switch to Intercom
station.
System requirements
Server
– VirtuoSIS (min. version 5.0) or
– S3/S6 (min. version 7.1) or
– Compatible SIP server or
– Serverless operation
Configuration software
– Set-UP min. version 1.5.3
