commend.com
Security and Communication
The design and/or specifications of products may be subject to change for improvement without prior notice. Errors excepted.
OD10 TD CM
DATA SHEET V1.3/0522
SA
|
3
Accessories
Power injector PA 25W POE-DC
In applications where PoE sourcing equipment is not available, the
optional power injector PA 25W POE-DC offers a compact, con-
venient solution. It supports a wide DC input range (24 – 48 V) and
is IEEE 802.3af/at compliant. The power injector connects easily
and conveniently to an Intercom station through an Ethernet cable.
Expansion module EB3E2A-AUD
The EB3E2A-AUD expansion module provides an easy way to
expand the I/O and audio capabilities of an Intercom station.
The expansion module is suitable for any applications where
inputs and outputs are required. It has three inputs, two output
relays and ports for direct connection of an external loudspeak-
er, external microphones and handset. Line-in and line-out con-
nectors provide additional flexibility. The board can be connect
-
ed to the station PCB through a USB cable and is immediately
available in the system.
USB I/O module EB1E1A
With the USB I/O module EB1E1A, a base module can
be expanded with an input and a relay output (normally
open contact). The EB1E1A can be connected to a free USB port. By doing
this, a input as well as a floating, galvanically-isolated output contact is avail
-
able immediately – e.g. for use with a door opener.
Safety switch box IP Secure Connector
The IP Secure Connector provides high performance and
high, absolute security, even if the connected Intercom sta-
tion is located outdoors: If an unauthorised attempt is made
to remove the Intercom station, e.g. to access the connected
Ethernet cable, the IP Secure Connector interrupts the con-
nection to Intercom station and LAN. This ensures that it is
neither possible to access the network nor to open a door or
gate. Furthermore, the IP Secure Connector provides power
supply in form of PoE+ and has two inputs and three outputs.
Drywall/panel kit OD10 FB
With the drywall/panel mount kit OD10 FB, a base
module can be installed e.g. to a gypsum wallboard.
The OD10 FB is designed for wall mounting during
the construction or renovation phase.
In combination with this drywall/panel mount kit,
tamper detection is possible with an OD10 TD CM.
Flush mount box OD10 FBS
With the flush mount box OD10 FBS, a base
module can be installed e.g. to a brick wall.
The OD10 FBS is designed for wall mounting
during the construction or renovation phase. To
mount the Intercom station, the drywall/panel
kit OD10 FB is required. With this flush mount
box, a plaster compensation is possible.
Surface mount kit OD10 SH
With the surface mount kit OD10 SH, a base mod-
ule can be installed to any wall. The OD10 SH is
especially designed for subsequent mounting to a
wall or for mounting to thin walls.
The surface mount kit OD10 SH can be mounted to
a 2-fold flush-mounted wall box (acc. EN 60670-1;
60 mm /2.36 in screw distance).
In combination with this surface mount kit, tamper
detection is possible with an OD10 TD CM.
Induction loop kit AFIL-USB
With the AFIL-USB, an Intercom station can easily and quickly be
equipped with an induction loop amplifier module. For this,
only a free USB jack is required at the station. Thanks to
its compact size, the AFIL-USB fits easily into a flush
or surface mounting box.
Note:
It is possible to connect external USB devices to the device. The device supports
the connection of a maximum of one USB device of the same type at any time.
Example: One EB3E2A-AUD and one EB1E1A.