Commell MS-C78 User Manual Download Page 2

MS-C78 User’s Manual 

-1- 

Copyright 

 

Copyright 2014, all rights reserved. This document is copyrighted and all rights are 
reserved. The information in this document is subject to change without prior notice to 
make improvements to the products. 
This document contains proprietary information and protected by copyright. No part of 
this document may be reproduced, copied, or translated in any form or any means 
without prior written permission of the manufacturer. 
All trademarks and/or registered trademarks contains in this document are property of 
their respective owners. 

Disclaimer 

 

The company shall not be liable for any incidental or consequential damages resulting 
from the performance or use of this product. 
The company does not issue a warranty of any kind, express or implied, including 
without limitation implied warranties of merchantability or fitness for a particular purpose. 
The company has the right to revise the manual or include changes in the specifications 
of the product described within it at any time without notice and without obligation to 
notify any person of such revision or changes. 

 

Trademark 

 

All trademarks are the property of their respective holders. 

 

Any questions please visit our website at 

TU

http://www.commell.com.tw

UT

 

 

Summary of Contents for MS-C78

















































Reviews: