manualshive.com logo in svg

Commell MS-C78, User Manual, Page: 16 / 48

Share
Download
Commell MS-C78 User Manual Download Page 16

MS-C78 User’s Manual                                                                                 

-

15

- 

2.6 <Serial ATA Interface> 

MS-C78

 has Four Serial ATA III interfaces with RAID function, the transfer rate of the 

Serial ATA III can be up to 600MB/s, but 

not supports SATAII device.

 Based on Intel® 

PCH, it supports

 Intel® Matrix Storage Technology 

with combination of RAID 0,1,5 

and 10. The main features of RAID on Intel® Q87 PCH are listed below: 

1.  Supports for up to RAID volumes on a single, two-hard drive RAID array. 

2.  Supports for two, two-hard drive RAID arrays on any of six Serial ATA ports. 

3.  Supports for Serial ATA ATAPI devices. 

4.  Supports for RAID spares and automatic rebuild. 

5.  Supports on RAID arrays, including NCQ and native hot plug. 

For more information please visit Intel’s official website. 

For more about the system setup for Serial ATA, please check the chapter of SATA 

configuration. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SATA3-1 

SATA3-2 

SATA3-4 
SATA3-3 

Summary of Contents for MS-C78

















































Reviews:

No comments