background image

LE-575 User’s Manual                                     

 

46 

Chapter 4 <BIOS Setup> 

The motherboard uses the Award BIOS for the system configuration. The Award BIOS in 
the single board computer is a customized version of the industrial standard BIOS for IBM 
PC AT-compatible computers. It supports Intel x86 and compatible CPU architecture based 
processors and computers. The BIOS provides critical low-level support for the system 
central processing, memory and I/O sub-systems. 

 

The BIOS setup program of the single board computer let the customers modify the basic 

configuration setting. The settings are stored in a dedicated battery-backed memory, 
NVRAM, retains the information when the power is turned off. If the battery runs out of the 
power, then the settings of BIOS will come back to the default setting. 

 

The BIOS section of the manual is subject to change without notice and is provided here for 

reference purpose only. The settings and configurations of the BIOS are current at the time 
of print, and therefore they may not be exactly the same as that displayed on your screen. 

 

To activate CMOS Setup program, press 

DEL

  key immediately after you turn on the 

system. The following message “Press DEL to enter SETUP” should appear in the lower left 
hand corner of your screen. When you enter the CMOS Setup Utility, the Main Menu will be 
displayed as 

Figure 4-1

. You can use arrow keys to select your function, press 

Enter

 

key to accept the selection and enter the sub-menu. 
 

Figure 4-1

 CMOS Setup Utility Main Screen 

 

 

 

Summary of Contents for LE-575






























































Reviews: