background image

HS-874P User’s Manual                                              Introduction 
 

Product Specification 

1.2 <Product Specification> 

General Specification 

Form Factor 

Half size PISA bus CPU card 

CPU 

Support Intel® Core 2 Quad/ Core 2 Duo processor 
Package type: LGA775 
Front side bus: 800/1066/1333MHz 

Memory 

DDRII 667/800 MHz SO-DIMM up to 2GB 

Chipset 

Intel® Q35 and ICH9DO 

BIOS 

Phoenix-Award v6.00PG 8Mb SPI flash BIOS 

Green Function 

Power saving mode includes doze, standby and suspend modes. 
ACPI version 1.0 and APM version 1.2 compliant 

Watchdog Timer 

System reset programmable watchdog timer with 1 ~ 255 sec./min. 
of timeout value 

Real Time Clock 

Chipset integrated RTC with onboard lithium battery 

Serial ATA 

Intel® ICH9DO built-in 4 x Serial ATAII interface up to 300MB/s 
Support RAID 0, 1, 5, 10 and Intel Matrix Storage Technology. 

Multi-I/O Port 

Chipset 

Intel® ICH9DO with Winbond® W83627DHG controller 

Serial Port 

One RS232 and one jumper selectable RS232/422/485/IR

 

USB Port 

4 x Hi-Speed USB 2.0 ports with 480Mbps of transfer rate 

IrDA Port 

One IrDA compliant Infrared interface supports SIR 

K/B & Mouse 

PS/2 keyboard and mouse port on bracket 

GPIO 

One 12-pin Digital I/O connector with 8-bit programmable 

Smart Fan 

One CPU fan connectors for fan speed controllable 

VGA Display Interface 

Chipset 

Intel® Q35 & ICH9DO 

Memory 

Up to 384MB shared with system memory

 

Display Type 

CRT, LCD monitor with analog display, DVI or LVDS 

Connector 

External DB15 female connector on bracket 
Onboard 40-Pin LVDS connector (HS-874PX Only) 
Onboard 26-Pin DVI connector (HS-874PD Only) 

Ethernet Interface 

Chipset 

Intel 82573L Gigabit Ethernet controller 

Type 

Triple speed 10/100/1000Base-T 
auto-switching Fast Ethernet 
Full duplex, IEEE802.3U compliant 

Connector 

External one RJ45 connector with LED on bracket 

ISA Interface 

ISA Bridge 

Winbond W83628GA & W83629GA   

Function 

I/O & IRQ supported only, no support DMA & bus mastering 

Summary of Contents for HS-874P



























































Reviews: