8
+61 2 9975 6001
2.5 Step 4 (T-Series Only)
Guide the beam into position while adjusting the leg to avoid any damage to the surface.
Ensure that the beam holes line up with the leg block holes and the dressed side of the
beam if facing the top of the table.
Tighten the beam bolts (
) noting the orientation of the bolt head and washers.
M4 x 26mm
Then go back and completely tighten the leg bolts. The assembly of your T-Series table is
now complete. Safely stand the table on the legs and remove the protective film on top.
