29
R W
P Q
ვໞ ઋၼ ႕വጢཱཪဣ
" ลእቤᇚཪ ลእვ 76
" ጪໞ 76
M`ვໞ ઋၼ ጪໞ 76ၹു ጥ ે၏
ลእ ვໞ Ⴣ ဲൔ
17. How to set the button linghting
- P- Administration password - E - 27 - E - 0 - E : Light on (When it is touched)
- P- Administration password - E - 27 - E - 1 - E : Light on (Always)
- Through this function, you can adjust the light of the key button.
Enter the lighting status value.
0 : Button light ON when touching the
button.
1: ON all the time
Ex) In case of settingthe lighting condition ON all the time
Enter the Management PIN.
Complete to set the speaker volume
Press the Program Number (27).
Press the Call button (E).
Press the Call button (E).
Press the Program button (P).
1. Press program(P) button. ("Prog" will be turned on)
2. Enter the administration password
3. Press the call(E) button
4. Enter No.27 button(Button for light control)
5. Press the call(E) button
Inputted value will appear.
6. Selecet the light setting (Default is 0)
0: Light on (When it is touched)
1: Light on (Always)
7. Press call(E) button (Adjusted value will be inputted)
Press the Call button (E).
Summary of Contents for DRC-900LC
Page 35: ...34 24 Wiring Method Lobby camera phone DRC 900LC ...
Page 37: ...36 Memo ...
