25
14. Video Out Impedance Adjustment
- P-Building (Management) PIN - E - 6 - E - 0 - E: Short Distance
- P-Building (Management) PIN - E - 6 - E - 1 - E: Long Distance
- By default, the unit is set for short distance.
Do not change if possible.
0 : Short Distance
1 : Long Distance
Enter the Management PIN.
Impedance selection update
Press the Call button (E).
ex) Impedance Adjusted long distance
Select a Impedance.
Press the Program Number (6).
Press the Call button (E).
The current capacity
is displayed.
Press the Call button (E).
Press the Program button (P).
1. Press the Program button (P). ( 'Prog' will appear)
2. Enter the Building (Management) PIN.
3. Press the Call button (E).
4. Press number 6 (Wiring Method Selection).
5. Press the Call button (E). (Previous selection is displayed)
6. Select a wiring method.
0 : Short Distance
1 : Long Distance
7. Press the Call button (E). (Save new setting)
6
4 3 2 1
Summary of Contents for DRC-900LC
Page 35: ...34 24 Wiring Method Lobby camera phone DRC 900LC ...
Page 37: ...36 Memo ...
