8
✽
Program Button
⑪
In standby mode, if the button is pressed for 5 seconds, the voice message of
greetings will be heard with below information of product settings on the display.
<Reference>
Below information will be displayed.
1) Welcome! COMMAX Lobbyphone DRC-701LC Ver x.x. (Greetings)
2) Lobby Number: XXXX-XXXX ex) 0101-0901
3) Unit paging: x wire method ex) 4 wire method
4) Camera Impedance: low or high
5) Entrance Access Information is being stored at SecuMAX.
6) RF Reader 13.56MHz
✽
#6 message will show as RF Card has been read at least more than once and will
be initialized when power is off.
✽
Proximity Sensor
⑧
The proximity sensor located under the touch pad that detects an object within 1
meter and triggers LCD and Keypad lighting to be turn on.
✽
Please read below instructions before use
1) If you hear "beep beep beep..." during any program modes, please restart from
the beginning. The beep sounds for improper process.
2) If password is forgotten,
2-1) Password for any household :
Use the identifying household password function (6-1) to confirm the password
(methods to confirm password shall be requested to the Management office or
Security center).
2-2) Password for any building:
Reset the password by using Management password
2-3) Password for Management
Press "Reset Button".
The password will be reset to factory default.
3) Deleting All RF Card Keys function in "8-5" shall ONLY be used when the
product is initially installed.