3
2. Wiring & Installation
[FIG-3]
1. Align holes on the wall where the unit is
to be installed with mounting brackets hole
and secure.
FIG-1 : Install the camera at a 30
˚
angle to
the left (install the bracket in reverse
to angle 30
˚
to the right)
FIG-2 : Install the camera at a perpendicular
angle to the front
2. Wire the household monitor cables as
shown below with matched polarity as
picture below[FIG-3]
(#1:RED/VOICE, #2:BLUE/GND,
#3:YELLOW/DC12V, #4:BLACK/VIDEO)
3. Wire the door release cable as shown in
the diagram.[FIG-3]
4. Tighten using bolts and a wrench, then
cover using the AL. screw covers.
#1: RED(VOICE)
#2: BLUE(GND)
#3: 12V)
#4: BLACK(VIDEO)
Summary of Contents for DRC-4CPN3
Page 4: ...4 FIG 1 FIG 2...
Page 6: ...7 3 Package 6...
