5-2. AWAY SET (GO OUT MODE SETTING)
Move to AWAY SET from system setting and select below
(1) AWAY WAIT-SET :
SET the stand by time till sensor detection of household. It’s setting for time of leaving the house after
setting AWAY MODE. (Initial stand by time : 60seconds)
※
How to set
①
Move to AWAY WAIT-SET from AWAY SET
②
Enter numerical numbers(time) by using moving button
※
Attention
:
On AWAY SET, if sensor detects that customer doesn’t leave the house in designated time, alarm
rings. So, customer must leave before setting time
(2) AWAY WAIT-CLEAR :
Set the stand by time till alarm rings after sensor detection. It’s setting for time till canceling AWAY
mode after customer enter the house. (Initial stand by time : 0 seconds)
※
How to Set
①
Move to AWAY WAIT-SET CLEAR from AWAY SET
②
Enter numerical numbers(time) by using moving button
※
Attention
:
After coming back home, customer must clear AWAY mode in designated time. Unless
clearing in time, alarm rings
(3)
EXIT: Go back to system setting
12
