FEB.20, 2003
RST872
19
REMOTE START FEATURE PROGRAM MODE.
START FEATURE “
I
” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
8
times and hold it until
four
chirps with a long chirp is hearing then release the
valet switch. You are now in the Start feature
‘I’
programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
T
ransmitte
r
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
Gasoline
Engine
1
+
Diesel Engine
with
Wait-To-Start Light
(H5/5 White/Green
wire must be
connected)
Diesel Engine
without
Wait-To-Start Light
10 seconds warn-up
timer
Diesel Engine
without
Wait-To-Start Light
15 seconds warn-up
timer
Diesel Engine
without
Wait-To-Start Light
20 seconds warn-up
timer
2
10 minutes run time
20 minutes run time
30 minutes run time
5 minutes run time
3
Factory alarm
disarm with channel
3 on
Without this feature
4
Constant parking
light output
Flashing parking
light output
5
Door lock before
start
Door lock after
shut-down
Door lock before
start and Door lock
after shut-down
Without this feature
6
+
Press
-
button
=
Activate Remote
Start.
Press
+
button
=
Activate Remote
Start.
Press
button
=
Activate Remote
Start.
7
+
H5/8 White / Blue
Wire =
1 pulse activate
H5/8 White / Blue
Wire =
2 pulse activate
H5/8 White / Blue
Wire =
3 pulse activate
8
+
Temperature-Control
Starting OFF
Temperature-Control
Starting 5 F
Temperature-Control
Starting – 4 F
Temperature-Control
Starting – 22 F
Exit
:
Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
SAFE START (Child safety mode)
Factory defaults setting to press the
button twice to start the vehicle.
Programming this feature to eliminate an accidental remote start, when kids enter this transmitter, it requires:
The user press the transmitter
and
buttons at the same time to start the vehicle.
START FEATURE “
II
” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
10
times and hold it until
five
chirps with a long chirp is hearing then release the
valet switch. You are now in the Start feature
‘II’
programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
T
ransmitte
r
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
1
Exit the programming mode. (3 long chirp & 3 parking light flashes to confirm this exit.)
