Commando AirONE AP1300, Configuration Manual

Page: 48 / 112

WI-FI
In Wi-Fi setting you can set the 2.4G/5.8G Wi-Fi setting, MAC ACL, Repeater, Wi-Fi Timer
off and Advanced settings.
2G/5G Wi-Fi Settings:
Can set Multi SSID in 2G/5G band along with Basic SSID all other VAP 1, VAP 2, VAP 3
SSID can be set. You can ON/OFF particular SSID with this setting.
Repeater Settings:
Repeater can be turn ON or OFF. Selecting scanning repeater SSID with lock BSSID and
password and encryption setting.
MAC ACL Settings:
Can allow and prohibit wireless clients based on MAC address.
Wi-Fi Timer Settings:
Wi-Fi Timer ON/OFF along with setting Time Frame.
Advanced Settings:
In Advanced setting can set Country Region, 2G/5G Mode, Multicast Fast, Maximum
wireless clients, WLAN Partition, Short GI, Coverage Threshold and Transmit Power
Note:
All italic config options are only available in WISP and Gateway mode only.
3.1 2G/5G Wi-Fi Setting
We can set 2.4G/5.8G Wi-Fi with Basic Setting along with Virtual AP setting. You can
enable or disable Wi-Fi by
Wi-Fi Status: On
mean SSID is available for wireless clients.
Wi-Fi Status: Off
mean SSID not available.
Note:
By default, Basic Wi-Fi SSID “COMMANDO AIR-AP1300 2.4G” and “COMMANDO AIR-
AP1300 5.8G” is turned ON.