Commando AirONE AIR-CPE5K+, Configuration Manual

Page: 8 / 78

Note:
New Firmware version supports access IP
192.168.2.1
with password
commando
1. Wired access Via LAN port connected to PC.
Step 1:
Power ON AirONE AIR-CPE5K+ with the help of Adaptor 12V, 1A or 24V PoE
adaptor in WAN port.
Step 2:
Connect LAN port of AirONE AIR-CPE5K+ to PC via RJ-45 cable.
Step 3:
Open Network and sharing center.
Step 4:
Go to Change adapter settings.
Step 5:
Double click on Local Area Connection. Go to Properties.
Step 6:
Double click on Internet Protocol Version 4 (TCP/IPv4) option and set any IP
address from 192.168.188.1 to 252 with subnet mask 255.255.255.0 and Gateway of PC
to be set as
192.168.188.253 to as shown below.