Commando AIR-CPE10K+, Configuration Manual

Page: 32 / 80

Fig 2.4.3 Setting 5G Wi-Fi for AP mode of AirONE AIR-
Note:
It is recommended to keep Wi-Fi Timer OFF. The device will restart for the changes to
take effect for mode changes to AP mode.
2.5 Super WDS Mode
In Super WDS mode, Scan Repeater SSID whose password is known and configure WDS
setting. Then configure the wireless parameters as per your choice of SSID, Channel
width, Encryption and Time reboot if required.
Note:
Just in case if you don’t have any RJ 45 cable running to site then in Super WDS mode
you have to just power on the device and wirelessly can connect to clients as well as any
SSID (BSSID). No need of connecting physically LAN as well as WAN port. Maximum 4
Bridges/SSID can connect simultaneously. This is a default mode of operation for device.