To transfer after announcing
ask the outside party to wait
call the second station via paging, DSS or intercom. The line will be held automatically
announce the call
when the wanted party has taken the call the line lamp will glow steadily.
To answer
After being advised of a waiting call
lift the handset
press the given LINE key.
Transferring a call from a key station to a standard telephone station
To transfer without announcing, use the procedure above.
To transfer after announcing
ask the outside party to wait
press the
key
call the required standard telephone station (via ICM or
press the AD.ON key
replace the handset.
If the called station does not answer or is engaged
press the AD.ON key to return to the held call.
Ring Transfer (from station 10 only)
The audible signal for outside calls can be transferred from station 10 to any number of other stations:
lift the handset
press TR key. The ICM lamp glows and internal dial tone will be heard
dial the required station numbers, separating each number by the pressing the key
replace the handset. The TR lamp glows.
To cancel ring transfer
lift the handset
press the TR key.
l
replace the handset. The lamp will go out.
Night Transfer (from station 10 only)
When required your system may be switched to allow all outside calls to be directed to the programmed
night transfer stations.
lift the handset
press the TR key. ICM lamp glows, internal dial tone is heard
replace the handset. The TR lamp glows.
To cancel the night transfer mode simply repeat the above steps.
Abbreviated Dialling programming procedures for station 10 only
Up to 60 frequently called numbers can be stored in the system memory for abbreviated number calling.
All stations have access to stored numbers, but programming can be done only from station 10.
Numbers with up to 20 digits can be entered into memory locations 1 O-69.
Storing Numbers
lift the handset
press the DC key. The ICM lamp will glow, and internal dial tone will be heard
press the HOLD key
dial the required location number eg. 10
dial the required telephone number eg. 123456
to store more numbers, press the DC key and repeat the above procedure
replace the handset
The telephone number 123456 is now stored in memory location 10. Any number previously stored for
location 10 will be automatically erased.
NOTE:
If your system is an extension from a PABX and a pause is required within the telephone
number, press the BREAK key and continue to enter the remaining digits.
13
AN-61 6
ISSUE
