- -
1.3.5.8
Direct Station Selection (Basic and On-Hook Stations)
The Direct Station Selection keys are designated
8 frequently called station numbers can be stored
in the system memory, and called by using only one key
To store a station number
lift the handset
press DC, ICM and the required F key where the station number is to be stored
dial the station number
replace the handset
Repeat the above steps for other F locations.
To make an intercom call
lift the handset
press the required F key
All the normal intercom tones will be received when using Direct Station Selection.
Follow Me
To divert intercom calls from your station to any other station:
with the handset on hook
press the TR key
dial your station number, then the station number to which your calls are to be diverted
press the TR key again
The
TR lamp will flicker at your station and will show a double flash at the selected station.
To cancel
with the handset on hook
press the TR key
dial your own station number
press the TR key again. The lamps will go out.
1.3.5.10 Paging (optional)
Three types of paging calls can be made:
All call paging
To make an announcement to all stations
Zone paging Internal
To make an announcement to stations in one of three zones
Zone paging External
To make an external public address announcement
To make a paging call
lift the handset
press the ICM key
wait for internal dial tone
dial the wanted paging code and make the announcement
Paging codes
all call paging
8 0
internal zone 1
81
internal zone 2
8 2
internal zone 3
83
internal all-zone
8 4
external zone
85
1.3.5.11 Meet-me Paging (optional)
After making an All Call or Internal Zone paging announcement for a called party to “Meet-Me”
press
l
and wait, with the handset off hook, for the called party to respond
The called party establishes the connection by lifting the handset and dialling
l
at any station receiving the
paging call.
1.3.5.12 Intercom Camp-on (optional)
If busy tone is heard when making intercom calls
press
l
and remain off-hook, the intercom call will be automatically established when the called
station is free.
Note:
This feature is not provided if the called station is programmed for off-hook signalling.
11
AN-61 6
ISSUE
1
