Command Light CL602A, Manual, Page: 22 / 48

COMMAND LIGHT
21
Technical Specifications – Standard AC Models
(CL602A)
Dimensions (with strobe and ½” mounting spacers)
Height(Depth) Length Width
Retracted 12.75" 74" 41"
Extended
10'-7" 80" 41"
Recessed installation 12.75" 86" 48" Minimum
Weight: 306 pounds
Wiring:
Main Power VAC 8/4 SO cord 50' provided
Control wiring 22/20 PVC Jacketed 50' provided
Relay protection:
Lights Cole-Hersey 3055 40 amp
Other electrical Cole-Hersey 3055 40 amp
Current Draw / Power Requirements:
Average Generator Requirement
75 Watt LED
220 Watt LED
115 VAC/8 amps
115 VAC/11 amps
1 kW minimum
1.5 kW minimum
Lift actuators and rotation motor will cause higher current draw during use.
Motor Duty Cycle:
(All motors thermally protected, specifications are to thermal relay trip):
Lower stage 1:3 (90 seconds maximum per 5 minute)
Upper stage 1:3 (90 seconds maximum per 5 minute)
Rotation 5-6 Revolutions
Motor Speed:
Lower stage 1.0 inches per minute 12 seconds to full extension
Upper stage 0.5 inches per minute 12 seconds to full extension
Rotation 2.75 RPM at lamp tree
Operation:
Angle of vehicle 15˚ maximum incline
Wind load:
Design maximum 60 mph
Maximum tested 55 mph