Command Light C-Lite, Manual

Page: 7 / 16

USER GUIDE
7
General Description and Specifications
Optimal Operating Voltage 12VDC
Acceptable Operating Voltage 11-13VDC
Max Amp Draw 17.5 Amp
Electrical Wiring
The C-Lite is provided with 25 feet of 12AWG-2 Conductor Cable color coded with red and
black wires. Provide a 12VDC+ signal on the red wire and a 12VDC Ground signal on the
black wire to power the
C-Lite. Reversing these wires may cause damage to the internal
circuitry or components of the C-Lite .
A 20 amp fuse is recommended to protect the
C-Lite from electrical damage.
Installation
The C-Lite must be installed by a designated installation facility by qualified personnel
only. All safety precautions must be thoroughly understood before installation. Please
consult the factory for additional installation information assistance.
Included Parts
Four (4) – ¼-20 x 1” Hex Head Bolt
Eight (8) – ¼” Flat Washer
Four (4) – ¼-20 Nyloc Nut
One (1) – ½” Straight Sealcon with Nut
One (1) – Command Light Screwdriver
One (1) – User Guide
Tools Required
7/16” Wrench and Socket
Drill with assorted bits