Two-Burst Ring to TTY/TDD port
1.
Plug a single line touch-tone telephone into the PHONE port of the CS8500-t
2.
Pick up the telephone handset (the PHONE LED will light)
3.
Unplug power, then plug back in
4.
The FAX LED will light to indicate you are in the programming mode
5.
Press
(the TTY/TDD LED will flash three times acknowledging your
changes)
6.
Press
(the TTY/TDD LED will flash three times again)
7.
Press
again to end programming mode; the FAX port LED will turn off
8.
Hang up the phone
Two-Burst Ring to FAX Port and Three-Burst Ring to TTY/TDD Port
1.
Plug a single line touch-tone telephone into the PHONE port of the CS8500-t
2.
Pick up the telephone handset (the PHONE LED will light)
3.
Unplug power, then plug back in
4.
The FAX LED will light to indicate you are in the programming mode
5.
Press
(the TTY/TDD port will flash three times acknowledging your
changes)
6.
Press
(the TTY/TDD LED will flash three times again)
7.
Press
again to end programming mode; the FAX port LED will turn off
8.
Hang up the phone
17
CS8500-t Operator’s Guid
Summary of Contents for ComSwitch 8500-t
Page 2: ......
