the CS 5500, instruct the caller to use the following dialing
string in the modem's software:
1 + phone number
,,,# 11,# 11,# 11,# 11
(for Automatic mode)
1 + phone number
,,,,,# 11,# 11,# 11,# 11
(for Semi-
Automatic)
adjust the number of commas you use accordingly.
NOTE
: In the Semi-Automatic mode, the commas entered
before the
#11
are set to your answering machine's 2 ring
answer. Use 3 additional commas for each ring that your
answering machine is set to answer above 2 rings.
7
CS 5500 Operator’s Guide
Distinctive Ring service compatibility
When you add a second or third phone number to your single
line, the CS 5500 works smoothly to process calls without
depending on access codes or transfer tones.
The phone company's Distinctive Ring service is offered in
most areas across the U.S. Phone companies offer this service
under various names, check with your local phone company for
details.
The CS 5500 will process the additional phone numbers (ring
styles) as follows:
standard ring - - - - PHONE and TAD ports
two-burst ring - - - - FAX/MODEM port
The factory setting for Distinctive Ring detection is OFF.
To turn Distinctive Ring detection ON, perform the following
steps:
1. Take the phone in the PHONE port off-hook
2. For line 1, press # * 114 * (three beeps) *
3. Hang up the phone
To turn Distinctive Ring detection OFF, perform the following
steps:
1. Take the phone in the PHONE port off-hook
2. For line 1, press # * 014 * (three beeps) *
3. Hang up the phone
Contact Customer Service for more information regarding operation with the Distinctive Ring service.
Remote Message Notification
The CS 5500 can automatically send a special tone message to
any desired telephone number - local or long distance every
time you receive a voice message, fax document or data
transmission.
One application using Remote Message Notification would
allow the CS 5500 to notify you when a message is received on
your answering machine.
During the notification call from the CS 5500, you can retrieve
the message from your answering machine (if the answering
machine is able to play back messages remotely).
NOTE
: The Remote Message Notification is programmable
ON/OFF with various settings (default OFF). Contact Customer
Service for more information.
Features of the CS 5500 are programmable. Programming options are available upon request by
contacting Customer Service.
Customer Service: 1-800-288-6794 – Monday through Friday 8:00am – 5:00pm Mountain Time.
