RDT-A7.0 Installation Guide
5
Install the RDT-A7.0
Installing the RDT-A7.0 includes the following steps:
1. Mounting the RDT-A7.0
2. Connecting the RDT-A7.0 to the OBC
Mounting the RDT-A7.0
Before fastening the RAM mount to the vehicle dash and installing the RDT-A7.0, refer to
our
Because securing the mount to a vehicle's dashboard is subject to many variables and installers are
expected to have previous experience with this process, these instructions do not include specific
steps. However, see the tips below for additional information.
Helpful tips
Before securing the mount to the dashboard, find the optimal spot for the
RDT-A7.0 and mount to be positioned. The best location will be one that
does not allow the unit to block the driver's view of the road or interfere
with the safe and standard operation of the vehicle. Keep in mind the
mount is adjustable.
To get an accurate estimation of how the tablet dock and mount will be
positioned, it might be helpful to attach the RDT-A7.0to the mount
temporarily. If this is done, unscrew the mount and RDT-A7.0 before
installing the mount on the dashboard for ease of installation.
Screwing the mount into the dashboard will require drilling through the
dashboard or dash plate first to establish screw-in points for the mount.
Use proper equipment, safety, and sense to avoid damaging any wiring or
equipment in and around the dashboard. (Continued)
