Comm-Tec ProTUNE HD / S, User Manual

Page: 15 / 59

22K: Use [VOL
34
] to select “ON” or “OFF”. The 22kHz signal is used at KU Universal LNB to switch
between low and high frequency band.
!
NOTE : If you set the LNB type to Universal, you cannot change 22K.
DiSEqC1.0: Press [VOL
34
] to switch DiSEqC switch options: disable / LNB1 / LNB2 / LNB3 / LNB4
2. Polarization: Press [VOL
34
] to select between: Auto / H / V / OFF.
3. Transponder: Press [VOL
34
] to select the desired transponder.
With the help of signal strength and quality display, you can check if your settings were successful.
The respective changes are being saved by [YES]
3.1.2 Satellite List
If you select “Satellite List”, you will see the following window:
1. Press the red key to edit the satellite. You can edit the name of the satellite and its longitude
with the respective color, and [CH
56
VOL
34
] buttons.
In this dialog, use the [Red] key for case-sensitive, [Green] to delete, [Yellow] to confirm and
[Blue] to exit the menu.