4K 4x4 HDBaseT Matrix Switcher
Comm-Tec S.r.l.
29
www.comm-tec.it
Controlled by PC(s) in LAN
Connect MTX44UH, a router and several PCs to setup a LAN (as shown in the
following figure). Set the IP and gateway of MTX44UH to the same as the router’s, then
PCs within the LAN are able to control MTX44UH.
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of the MTX44UH to Ethernet port of PC with twisted
pair.
Step2.
Set the PC’s IP address and gateway to the same as the MTX44UH’s. Do
please remember the PC’s original IP address and gateway.
Step3.
Set the MTX44UH’s IP address and gateway to the same IP section as the
router.
Step4.
Set the PC’s IP address and gateway as the original one.
Step5.
Connect the MTX44UH and PC(s) to the router. PC(s) within the LAN is able
to control the MTX44UH asynchronously.
Then it’s able to control the device via GUI.
4.4.2
GUI for TCP/IP control
MTX44UH provides with built-in GUI for convenient TCP/IP control. GUI allows users to
interact with MTX44UH through graphical icons and visual indicators.
Type 192.168.0.178 in your browser, it will enter the log-in interface shown as below:
Router
Internet
PC
TCP IP Port
/
