4K 4x4 HDBaseT Matrix Switcher
Comm-Tec S.r.l.
20
www.comm-tec.it
Command
Function
Feedback Example
/:MessageOn;
Turn on the feedback command from the
com port.
/:MessageOn;
Demo.
Switch to the “demo” mode, convert input
and output in turn like1B1, 1B2, …4B3,
4B4, 1B1… and so on .The switching
interval is 2 seconds.
Demo Mode
Undo.
To cancel the previous operation.
Undo Ok!
Operation Commands
[x]All.
Transfer signals from the input channel [x]
to all output channels
X To All. (X=1~4)
All#.
Transfer all input signals to the
corresponding
output
channels
respectively like 1->1, 2->2…
All Through.
All$.
Switch off all the output channels.
All Closed.
[x]#.
Transfer signals from the input channel [x]
to the output channel [x].
X Through. (X=1~4)
[x]$.
Switch off the output channel [x].
X Closed. (X=1~4)
[x]@.
Switch on the output channel [x].
X Open. (X=1~4)
All@.
Switch on all output channels.
All Open.
[x1]V[x2].
Transfer the AV signal from the input
channel [x1] to the output channel [x2].
AV: X1-> X2
(X1/X2=1~4)
[x1]B[x2].
Transfer the AV and IR signal from the
input channel [x1] to the output channel
[x2].
AV: X1-> X2
(X1/X2=1~4)
[x1] R[x2].
Transfer the IR signal from the input
channel [x1] to the output channel [x2].
IR: X1-> X2(X1
、
X2=1
、
2
、
3
、
4)
Status[x].
Check the I/O connection status of output
[x]
AV: Y-> X
(X=1~4, Y=1~4)
Status.
Inquire the input channel to the output
channels one by one.
AV: 1-> X1
AV: 2-> X2
AV: 3-> X3
AV: 4-> X4
Save[Y].
Save the present operation to the preset
command [Y], ranges from 0 to 9.
Save To FY (Y=0-
9)
Recall[Y].
Recall the preset command [Y].
Recall
From
FY
(Y=0-9)
Clear[Y].
Clear the preset command [Y].
Clear
FY
(Y=0-9)
PWON.
Work in normal mode.
PWON
