Comm-Tec MTX0404VA, User Manual

Page: 8 / 10

User Manual for VGA/Stereo-Audio Matrix COMM-TEC MTX Series
COMM-TEC GMBH www.comm-tec.de
8 of 10
4.3 RS-232 Operation
Through the RS-232 port located on rear panel one is able to control and operate the MTX Matrix remotely.
Communication protocol: RS-232, ASCII commands are case sensitive.
Port Settings: Baud rate: 9600, Data bit: 8, Stop bit: 1, Parity bit: None
Functions
ASCII
Commands and
Protocols
Example Default
System Command
Rewrites the password. Must be 8 digits. /+ xxxxxxxx ; /+12345678; None
Locks the keyboard /%Lock; /%Lock; Not Locked
Unlocks the keyboard /%Unlock; /%Unlock; N/A
Turns OFF buzzer /:Belloff; /:Belloff; Beep ON
Turns ON buzzer /:Bellon; /:Bellon; N/A
Sets the delay time for background light in minutes.
Range: 001 to 240.
/%Backlight xxx ; /%Backlight005; 30 min.
Operation/Control Command
Connects input "x" to ALL output channels. x All. 3All. N/A
Connects the video signal from input "x" to the matching
output.
x #. 4#. Not Connected
Connects ALL input signals to the matching output channels. All#. All#. N/A
Switches OFF ALL the output channels. All$. All$. All ON.
Switches OFF output "y". y $. 2$. N/A
Connects video from input "x" to output "y". x V y . 2V3. N/A
Connects video from input "x" to outputs "y, y2, y3". x V y , y2 , y3 . 1V3,4,5. N/A
Connects audio from input "x" to output "y". x A y . 2A4. N/A
Connects audio from input "x" to outputs "y, y2, y3". x A y , y2 , y3 . 1A2,3,4. N/A
Connects video and audio from input "x" to output "y". x B y . 3B5. N/A
Connects video and audio from input "x" to outputs "y, y2, y3". x B y , y2 , y3 . 2B4,5,6. N/A
Connects input "x" to ALL outputs in group "g". x P g . 1P1. N/A
Groups the outputs "y, y2, and y3" under the group "g". g PP y , y2 , y3 . 2PP1,2,3. N/A
Saves configuration to the preset command "y". "y" ranges
from 0 to 9.
Save y . Save9. All Available
Recalls the preset command "y". Recall y . Recall7. N/A
Clears the preset command "y". Clear y . Clear5. N/A
Feedback/Status Command
Displays the outputs channels in Group "g". S g . S2. N/A
Displays the input channel of output "y". Status y . Status4. N/A
Displays the inputs to the connected outputs one by one. Status. Status. N/A
Displays the models information. /*Type; /*Type;
Varies per
model
Displays Software Version /^Version; /^Version; V2.z
Displays COM port feedback information. /:MessageOn; /:MessageOn; N/A