User Manual for Composite/Stereo-Audio Matrix COMM-TEC MTX series
COMM-TEC GMBH
www.comm-tec.de
9 of 12
5. Press the button for the second output channel
number “4”.
Display feedback on LCD: “4”
6. Press the button “END” to finish the command.
Display feedback on LCD: “.”
7. Press the button “ENTER” to perform this
command.
Display feedback on LCD: “Switch OK”
Example 2: To inquire the status on the output channel No.4
Operation: Press buttons in this order “4”, “STATUS”
Feedback in LCD-Display: Videoinput #3 and Audioinput #2 are switched to Output #4.
More switch commands:
„ALL“ + „1“:
Routes inputs to outputs with the same number: 1 to 1, 2 to 2,....
„1“ + „ALL“:
Routes input #1 to all outputs, <2> <ALL>: Routes Input #2 to all outputs, and so on.
„ALL“ + „2“: Disconnects all routed crosspoints.
„SAVE“ + „0“ to „9“:
Saves present configuration as preset under selected number.
„RECALL“ + „0“ to „9“:
Recalls saved preset with the selected number.
4.2 Remote Controller Operation
The MTX series matrix switcher can be controlled with the infrared remote controller.
Button functions are the same as with front panel. Only the buttons „Through“ and „Close“ have a
functions when pressed directly after „ALL“.
The keys <PROGRAM>, <UNDO>, <DEMO> are without function. Attention <LOCK> button: before
usage set password with control software. Otherwise front panel can be only unlocked with this
software.
For details please refer to
Front Panel Operation
.
0
END
/
ENTER
RECALL
3
4
2
Input Command
：
1B3 4
，
Input Command
：
1B3 4.
，
1B3,4.
Switch OK
3
4
2
RECALL
STATUS
CANCEL
VIDEO: 3 4
AUDIO: 2 4
Switch OK!
AV: 01 -> 004
