User Manual for Composite/Stereo-Audio Matrix COMM-TEC MTX series
COMM-TEC GMBH
www.comm-tec.de
5 of 12
2.4 Back Panel
Rear Panel of 8 x 8 BNC Stereo Audio-Cinch
Depending on the model of the matrix, the video signal I/O interface is made up of 4 or 8 channels on RCA
terminals or 16 BNC female terminals. Audio signal I/O terminals are made up of 4, 8 or 16 RCA terminals for
each channel (left & right). The channel numbers of the signal I/O terminals start from channel 1 to the
maximum number of channels depending on the model. Audio left state terminals are white, audio right state
terminals are red RCAs. Please refer to back panel figure for other types of interfaces
The AV matrix switchers have an internal power supply with IEC female connector for power cord. There is a
9pin SubD female connector for RS-232 port. An RJ-11 port (Auxiliary) is for future expansion.
2.5 Front Panel and Rear Panel of other MTX CA Models
Front Panel of 4x4 (1U)
Rear Panel of 4x4 (1U)
Front Panel of 8x4 and 8x8 (2U)
Back Panel of 8x8 (2U)
