User Manual
DA-14C-Dual-2
COMM-TEC GMBH
SIEMENSSTRASSE 14
T49(0)7161/3000-0
WWW.COMM-TEC.DE
D-73066 UHINGEN
T49(0)7161/3000-333
4.0 Installation
4.1 Standard application
Standard system with 2 sources :
a) Make sure that all the units to be installed are switched off.
b) Connect the video sources to the two BNC identified as IN1 and IN2
c) Set the DIP-switches #2 and #4 in ON position.
d) Set the DIP-switch #3 in OFF position.
e) Set as desired the two DIP-switches #1 and #5 to establish the DC or AC
coupling.
f) Connect the destinations
g) Power the DA-14C-Dual-2 and the other units of the system.
4.2 Loop-through input signals with T adapter
For a loop-through of the input signals towards other units, use a "T" adapter and
set the DIP-switch #4 (IN1 75ohm
)
and/or #2 (IN2 75ohm) in OFF position. The
example below shows the setting for both inputs AC coupled, input #1 is
configured for loop-through and input #2 is terminated with 75 Ohm
