COMFORTPOOL PRO+10, Installation Instructions Manual

Page: 13 / 42

13
5. LCD Controller Display
5.1 Setting step
1. Under running status, press

to adjust the temperature.
2. Press
“Mode” to choose the mode:
3. Press
“Mode” again
cooling
4. Press
“Mode” again
heating
5. Standby status:
Warning! These default settings are correctly preset. Only allow a qualified heat pump technician to change them.
- Press
“Mode” 5 seconds, get a sound “B”, LCD display will show “0” “27”. Press “SET” to enter Cooling temp. setting.
Press

to alter cooling temp.
Press “SET” again to confirm.
- Press
“Mode” again “1” “27”. Press “SET” to enter Heating temp. setting. Press 
to alter heating temp. Press
“SET” again to confirm.
- Press
“Mode” again “2” “40”. Press “SET” to enter Defrosting time setting. Press 
to alter defrosting time. Press
“SET” again to confirm.
- Press
“Mode” again “3” “-7”. Press “SET” to enter Defrosting temp. setting. Press

to alter defrosting temp. Press
“SET” again to confirm.
- Press
“Mode” again “4” “13”. Press “SET” to enter Exit defrosting temp. setting. Press 
to alter exit defrosting
temp.
Press “SET” again to confirm.
- Press
“Mode” again “5” “8”. Press “SET” to enter Exit defrosting time setting. Press 
to alter exit defrosting time.
Press “SET” again to confirm.
Press
“Mode” again “6” “1”. Press “SET” to enter System quantity setting. Press 
to alter system quantity. Press
“SET” again to confirm.
- Press
“Mode” again “7” “1”. Press “SET” to enter Automatic setting. Press

to alter.
Press “SET” again to
confirm.
- Press
“Mode” again “8” “1”. Press “SET” to enter Mode setting. Press 
to alter.
Press “SET” again to confirm.
- Press
“Mode” again “9” “0”. Press “SET” to enter Water pump setting. Press 
to alter.
Press “SET” again to
confirm.
- Press
“Mode” again “A” “40”. Press “SET” to enter Return water temp. setting. Press 
to alter.
Press “SET” again
to confirm.
- Press
“Mode” again “B” “5”. Press “SET” to enter Overheat protection (heating mode) setting. Press

to alter.
Press “SET” again to confirm.
- Press
“Mode” again “C” “35”. Press “SET” to enter Electronic expansion valve setting. Press

to alter. Press
“SET” again to confirm.
- Press
“Mode” again “D” “5”. Press “SET” to enter Overheat protection (cooling mode) setting. Press 
to alter.
Press “SET” again to confirm.