comfortel 1400 IP Advanced Information Download Page 411

Page: 411 / 718

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017

411

Voice Mailboxes on the PBX

Announcements

1. Press the

Message key

2. Select the message list for the voice mailbox.

3. In the list field on the left, above the message list, select the

Locuciones

option.

4. Select a recorded announcement.

5. Tap:

•

to use this announcement instead of the PBX's default

announcement.

•

to switch off this announcement and replace it with the PBX's

default announcement.

The selection you make here is then used by the PBX.

Note:

If you have not recorded and enabled your own announcement,

the PBX's default announcement is played when a call is received.

Deleting an Existing Announcement

Proceed as follows:

•

Using the Configuration Manager on the PBX (see Advanced Infor-
mation for the PBX)

•

Using the telephone

1. Press the

Message key

Summary of Contents for 1400 IP















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands

comfortel 1400 IP, Advanced Information

Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands