- 10 -
Version: May 2011
5.
Plug the power pack into the
electrical outlet. The water pump will
turn on and begin pumping water.
Water should flow from the small
return nozzle on the bottom inside
wall of the spa behind the power
pack. If water is not flowing from the
return nozzle, repeat the air bleeding
instructions provided in step 4.
Unplug the
power pack while
bleeding air.
NOTE: If the air is not properly bled from
the filter tank, the water pump will be air
bound and no water will flow. This will
prevent the spa from heating, and the
water will not be filtered. Make sure water
is flowing from the return nozzle before
continuing
6.
Place the inflatable bladder cover
on the spa. Make sure the cover is
centered on the spa.
7.
Place the top cover over the spa
and line up the cover locks.
Always supervise children around
bodies of water. The spa cover is
not a safety cover. The spa cover
is not a substitute for adult
supervision.
8.
Connect the eight clips to secure
the cover in place. The clips may be
locked using the small keys provided
in the patch kit.
Meijer.com
