7
OPERATING INSTRUCTIONS
1. Start and select working mode
With master power switch at the rear of the unit on, turn
the heater on by pressing the POWER button on the
control panel or by pressing the Power button on the
supplied remote control.
Once power is off, heating elements will stop working at
first. Fan will continue working for up to 2 minutes to
emit residual heat inside the unit.
Select a heat setting.
Press the MODE button to toggle between the three heat
settings.
High Mode uses 1500W; Low Mode uses 750W. ECO
mode is an Economic Energy Saving Function. When
ECO mode is chosen, the heater will set the temperature
automatically to 68°F
（
20
℃）
under this mode
2. Setting room temperature
Adjust the thermostat by pressing the arrows on the
control panel or remote control.
Or
Set temperature indication varies from 59
℉
to 86
℉，
or from 15
℃
to 30
℃
. Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
Press
℃
/
℉
button on control panel to switch between
Fahrenheit value or Celsius value.
When Fahrenheit indicating light is on, digital display
indicates Fahrenheit value.
When Celsius indicating light is on, digital display
indicates Celsius value.
