Manual Operation
The switches located at the top right hand side of the fire .The standby switch must be first
switch on ..
Press once the 0/1 button to turn on the appliance and fire effect. A red indicator light will
appear to indicate that the function is ON. Press the 0/1 button for 3 seconds this will operate
the dimmer mode.
•
Press once the 7 SOW button for the low heat settings; press twice to switch off the heat setting.
Press once the 1500W button for the high heat settings; press twice to switch off the heat
setting.
Remote Operation
The standby switch located at the top right hand side of the fire must be first switch on ..
It takes some time for the receiver to respond to the transmitter. Do not PRESS the buttons
more than once within two seconds for correct operation.
Press once the button ON/OFF on the remote control this turns ON/OFF the appliance and fire
effect.
•
Press once the 7 SOW button for the low heat settings; press twice to switch off the heat setting.
Press once the 1500W button for the high heat settings; press twice to switch off the heat
setting.
Press the DIMMER button for operate the dimmer mode.
Safety Cut-Off
This appliance is fitted with a safety cut-off which will operate if the fire overheats (e.g. Due
to blocked air vents). For safety reasons, the fire will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15 minutes.
Reconnect the supply to the mains and switch on the appliance.
Maintenance
Warning: Before any maintenance and/or cleaning the exterior of the fireplace, disconnect the
unit form the power supply and leave until cooled off.
Remote control battery replacement: this remote control uses 2xl .5V AAA battery. Make
sure the batteries are installed correctly in the remote control.
This product does not use a standard bulb for its flame effect. The appliance uses an
electronically controlled LED system to create the flame effect therefore no parts need to be
replaced. There are no user-serviceable parts on this appliance. Under no circumstances
should the appliance be serviced by any one other than a qualified electrician.
5