Drill and fit wall plug.
Refit the heater to the wall fixing bracket and rotate the bottom fixing bracket down again and
use the screw provided to permanently fix the heater in place.
Unpack the pebbles from the bag and place them along the light unit in the desired position.
• Place the front glass surround over the front of the fire aligning the slots in the brackets at each
side of the glass panel with the lugs on the sides of the fire-see Fig.4. Again two people will
be required for this operation.
900
I
610
()
0
1!
0 0
Instructions for Use
Fig.I
Fig.3
I
I
-
--
Fig.2
Fig.4
The appliance can be operated either by the switches located on the top right hand side of the
fire or by supplied remote control.
4