5
HOW TO OPERATE THE UNIT:
If you want to circulate room air only, you
must set the unit to FAN. If you want to heat your room, you must set the unit
to HEAT
FAN:
To circulate room air, set the AUTO/MAN switch to MAN and use the
temperature dial to adjust the amount of airflow. The AUTO mode is not used
in the FAN setting.
HEAT:
To heat your room, you can operate the unit either automatically in the
AUTO mode or manually in the MAN mode.
In AUTO: Set the Temperature dial to desired setting between 50 °F and 80 °F.
The unit will automatically adjust the heat output as the room gets warm or
cold.
In MAN: Set the dial to a desired setting between 50 °F and 80 °F. The unit will
continue to run at that setting until you turn the dial to a higher or lower setting.
In this setting you may change the heat output but the unit does not sense the
room temperature.
HOW THE AUTOMATIC TEMPERATURE WORKS:
When in the AUTO mode, the DiscFurnace’s automatic
temperature control monitors the changes in the room’s
temperature and adjusts the heat output without cycling on and
off. As your room gets warmer, the heat will gradually cut down
to a lower wattage level. As your room gets colder, the heat weill
gradually increase to a higher wattage level. This is a more
effective and a more efficient means of heating than conventional
thermostats that create noisy on/off cycling and hot/cold spells
