www.fmiproducts.com
111986-01G
23
INSTALLING OpTIONAL WALL
MOUNT SWITCH - GWMS2
1. Connect one terminal of 25 ft. wire for
wall switch to TPTH terminal on the valve.
Connect remaining wire terminal to the TH
terminal on the valve. Make sure wire ter
-
minals are in positions on unit as pictured
in Figure 36. If wires are not connected as
shown, switch will not work.
2. Route 25 ft. wire through openings pro
-
vided on sides of burner system to a con
-
venient location to mount your switch.
3. Connect one bare wire end to each termi
-
nal of GWMS wall switch.
4. Install wall switch and cover in the wall.
FIREPLACE INSTALLATION
Continued
Figure 36 - Attaching Alkaline Battery to
Receiver
To Wall
Switch
Accessory
