107124-01E
For more information, visit www.desatech.com
For more information, visit www.desatech.com
17
17
INSTALLATION
Continued
7
6
Figure 34 - Installing Crossover Log (#6)
(CCL3930PTA Shown)
Figure 35 - Installing Crossover Log (#7)
(Model CCL3930PTA Only)
Pins
Log #2
Front Log (#1)
Middle
Log (#2)
Crossover
Log (#6)
Holes
Pins
5.
For CCL3924PT and CCL3930PTA Only:
Locate pin and hole
on the bottom of crossover log (#5). Slide the pin into the hole
located in crossover log (#4). Slide the hole onto the pin on
front log (#1). See Figure 32.
For CCL3018P and CCL3018PT Only:
Locate holes on the bot-
tom of crossover log (#5). Slide the holes over the left pins on
middle log (#2) and front log (#1). See Figure 33.
6.
Locate holes on the bottom of crossover log (#6). Slide these
holes onto the right pins located in middle log (#2) and front
log (#1). See Figure 34.
7.
For CCL3930PTA only:
Locate holes on the bottom of cross-
over log (#7). Slide onto the pins located in crossover log (#6)
and middle log (#2). See Figure 35.
8.
Add lava rock around base of heater if desired. Do not place
any lava rock on logs or burner.
Figure 32 - Installing Crossover Log (#5)
(CCL3930PTA Shown)
Crossover Log (#4)
Front Log (#1)
Crossover
Log (#4)
Front Log (#1)
Figure 33 - Installing Crossover Log (#5)
(CCL3018P and CCL3018PT Only)
INSTALLATION
Installing Logs (Cont.)