Comfortflame.US.com
900564-00NC
4
UNPACKING
1. Remove all protective packaging from inside firebox. Carefully lift
the firebox off the bottom corrugated tray.
2. Carton should contain 2 deflective hoods and hardware packet in
addition to firebox assembly. If items are missing, inform dealer
where you bought firebox.
3. Check firebox for any shipping damage. If firebox is damaged
contact IHP at Comfortflame.US.com for replacement parts
before returning to dealer.
NOTICE: The firebox identification label (including
model number, serial number, clearances, etc.) is
located underneath the heat shield. See Figure 19,
page 14.
PRODUCT FEATURES
OPERATION
This firebox is designed for use with approved ANS Z21.11.2 decora-
tive type unvented room appliances. (Physical size limitations apply.
Refer to minimum firebox requirements supplied with log appliance.)
It requires no outside venting or chimney making installation easy
and inexpensive. When used without the blower, the firebox requires
no electricity making it ideal for emergency backup heat.
BLOWER ACCESSORY
This firebox will accept the GA3750A accessory. The variable blower
allows you to select the fan speed you desire. The blower circulates
heated air from the firebox into the room. Use of blower is optional.
BRICK LINER
This firebox features a concrete brick liner. As with all concrete liners,
this liner may develop slight cracks when exposed to heat. These
cracks will not affect the performance of the firebox or vent-free
gas logs.
HEAT DEFLECTIVE HOOD
Two (2) black painted steel hoods come standard with the unit, which
must be installed for a safe operation.
