Comfortflame.US.com
900564-00NC
14
OPERATING GUIDELINES AND MAINTENANCE INSTRUCTIONS
Figure 19 - Location of Firebox Identification Label
Air Deflector
Identification
Label
Brick Liner
Heat Shield
When lit for the first time, a vent-free log appliance will emit a slight
odor for about an hour or two. This is a normal occurrence which is
due to the “curing” of the logs and the “burn-in” of internal paints
and lubricants used in the manufacturing process.
Keep control compartments, logs, burners and areas surrounding the
logs clean by vacuuming or brushing at least twice a year. Temporary
removal of the log set may ease the cleaning of the burner and pilot
assembly. In cleaning, take care not to alter the settings on the pilot
assembly. See the operating instructions supplied with your vent-free
log appliance for additional cleaning instructions.
WARNING: Logs can be very hot! Allow logs to
cool before handling.
IMPORTANT: Turn off the gas supply at the external shutoff valve
before servicing appliance. Any safety screen or guard removed for
servicing must be replaced prior to operating the appliance.
Installation and repair should be done by a qualified person. The
appliance should be inspected before use and at least annually by a
professional service person. More frequent cleaning may be required
due to excessive lint from carpeting, pet hair, etc. It is imperative that
the control compartments, burners and circulating air passageways
of the appliance be kept clean.
WARNING: Children and adults should be alerted
to the hazards of high surface temperatures and to
stay away to avoid burns or clothing ignition. Young
children should be carefully supervised when they are
in the same room as the appliance.
For lighting and operating this vent-free firebox, please refer to the
vent-free gas logs manufacturer’s instruction manual.
Note:
The firebox identification label (including model number, serial
number, clearances, etc.) is located underneath the heat shield. See
Figure 19.
