Operation
900475-00, 08/2015
Innovative Hearth Products
Aurora™ 35/40/45 Direct-Vent Gas Fireplaces
56
Installing the Aurora™ Series 35” logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE:
Do not cover the burner ports.
Table 34 - Aurora™ 35” Log Set
1
3
4
2
Log Number
Description
1
Rear Left Log
2
Rear Center Log
3
Right Front Log
4
Left Front Log
Catalog number for the entire set: F2193 for Aurora 35” Series
1.
If necessary, remove the glass door (
Pages 58-59
). Locate Log Placement Brackets (
Figure 48
).
2.
Bend up the log placement brackets (
Figure 48
). Place embers and other media (see
Pages 54-57
).
Figure 48 - Locating the log placement brackets
Figure 49 - Placing log 1 and 2
Left and Right Log Placement brackets
2
3.
Align the notches in the rear left log (1) with the left rear brackets (
Figure 48
).
4.
Position the rear left log (1) at the left rear of the firebox (
Figure 49
) and the Rear Center Log (2) on the left and
right log placement brackets (
Figures 48 and 49
).
Figure 50 - Placing log 3
Figure 51 - Placing log 4
3
4
5.
Position the right front log (3) on the right front log bracket and the right of the rear center log (
Figure 50
).
6.
Position the left front log (4) on the left of the rear center log (1) and right front log (5) on the right rear of the
back center log (
Figure 51
).
1
