Comfortflame.US.com
900578-00_NC
3
1. If you smell gas
• shut off gas supply
• do not try to light any appliance
• do not touch any electrical switch; do not use any phone in your
building
• immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions
• if you cannot reach your gas supplier, call the fire department
2. Never install the log set
• in a recreational vehicle
• where curtains, furniture, clothing, or other flammable objects
are less than 42" from the front, top, or sides of the log set
• in high traffic areas
• in windy or drafty areas
3. Before installing in a solid fuel burning fireplace, the chimney flue and
firebox must be cleaned of soot, creosote, ashes and loose paint by a
qualified chimney cleaner. Creosote will ignite if highly heated. Inspect
chimney flue for damage. If damaged, repair flue before operating
appliance.
4. This log set is designed to be smokeless. If logs ever appear to
smoke, turn off appliance and call a qualified service person.
Note:
During initial operation, slight smoking could occur due to
log curing and the burning of manufacturing residues. You may
wish to add more ventilation by opening a window.
5. To reduce the creation of soot, follow the instructions in Cleaning
and Maintenance, page 13.
6. The installation and provisions for combustion and ventilation air must
conform with the National Fuel Gas Code, ANSI Z233.1/NFPA 54, Air
for Combustion and Ventilation.
7. Do not run log set
• where flammable liquids or vapors are used or stored
• under dusty conditions
8. Do not burn solid fuel in the fireplace after installing the log set. Do
not use this log set to cook food or burn paper or other objects.
9. Do not use appliance if any part has been exposed to or under
water. Immediately call a qualified service technician to inspect
the room appliance and to replace any part of the control system
(if using GA9050A-1 (J1300) or GA9150A (J1302)) and any gas
control which has been under water.
10. To help prevent breakage, new logs must be broken-in (see Curing
Logs page 12).
11. Turn log set off and let cool before servicing, installing, or repair-
ing. Only a qualified service person should install, service, or repair
log set.
12. Provide adequate clearances around air openings.
13. This vented gas log set may not be installed in a bedroom or
bathroom in the Commonwealth of Massachusetts.
WARNING: Any change to this log set or its controls
can be dangerous.
WARNING: Do not use a blower insert, heat exchanger
insert or other accessory not approved for use with this
appliance.
WARNING: This appliance is equipped for natural
gas. An optional propane/LP conversion kit must be
installed for use with propane/LP gas.
WARNING: Do not allow fans to blow directly into
the fireplace. Avoid any drafts that alter burner flame
patterns.
WARNING: Installed decorative glass door enclo-
sures must be fully opened when operating this gas
appliance.
Due to high temperatures, the appliance should be
located out of traffic and away from furniture and
draperies.
Do not place clothing or other flammable material
on or near the appliance. Never place any objects on
the appliance.
Appliance assembly becomes very hot when in use. Keep
children and adults away from hot surface to avoid burns
or clothing ignition. Appliance will remain hot for a time
after shutdown. Allow surface to cool before touching.
Carefully supervise young children when they are in
the room with appliance.
You must operate this appliance with a fireplace screen
in place. Make sure fireplace screen is closed before
running appliance.
Keep the appliance area clear and free from combus-
tible materials, gasoline and other flammable vapors
and liquids.
SAFETY
Continued
