152088
Our window fashions represent a design breakthrough in style,
efficiency, and function. The unique hardware system is
designed to provide years of reliable service when properly
installed.
Please take a few minutes to read through these instructions
before beginning.
Cordless Roman
Standard and Top Down/Bottom Up
Installation Instructions
2/23/11
Rev D
CHECK LENGTH AND EQUALIZATION ON SHADES
NOTE: Only adjust one cord at a time. Disconnecting more than
one cord may allow the cords to retract into the headrail.
If the shade length and equalization is satisfactory, simply trim the
excess cord and ladder braid hanging below the bottom rail. For top
down/bottom up shades also trim the excess cord from the middle
moving rail.
If adjustments are necessary, pull the
excess cord at the bottom of the shade
down until the Bottom Rail Plug is
released (fig. A). Push the cord up or
down through the Bottom Rail Plug (figs.
B & C).
If the cord needs to be longer, slide the
bottom end of the cord up into the plug
and slide the plug down to take up slack.
If the cord needs to be shorter, slide the top end of the cord down into
the plug and slide the plug up to take up slack.
Adjust the position of the plug as necessary (fig. D).
Feed the cord back through the Bottom Rail Clip (figs. E & F).
Push the Bottom Rail Plug back into the Bottom Rail Pocket.
Follow the same procedures for adjusting the middle moving rail on
a top down/bottom up shade.
When bottom rail adjustments have been made trim the excess cord
and ladder braid hanging below the bottom rail. For top down/bottom
up shades also trim the excess cord on the middle moving rail.
CLEANING AND CARE
The shades are as easy to clean as they are to operate. Roman
fabrics are anti-static and actually repel dust. Occasional vacuuming
with a soft bristle attachment is all that is needed. Also, the use of a
feather duster or dust buster at a low setting will help keep your
shades clean and fresh. Roman shades may also be cleaned
ultrasonically.
A
OPERATION - STANDARD SHADE
To lower the shade, pull down on the handle which is secured to the
bottom rail. To raise the shade, push the bottom rail up. The shade
will hold at any position when the bottom rail is released.
This product should be operated from the handle of the bottom rail.
To
Lower
Center pole
end under
bottom rail.
Be sure to raise the shade slowly and steadily to allow the shade
enough time to stack evenly.
Be sure to use the handle when raising and lowering shade for better
support and smoother operation.
To
Raise
For out-of-reach operations, an optional
extension pole should be used.
OPERATION - TOP DOWN / BOTTOM UP
To raise or lower the shade, push up or down on the handle of either
the middle or bottom rail.The shade will hold at any position when the
middle or bottom rail is released.
Be sure to raise the
shade slowly and
steadily to allow the
shade enough time to
stack evenly.
Be sure to use the
handle when raising and
lowering shade for better
support and smoother
operation.
To
Raise
To
Lower
B
C
D
E
F
Bottom
Rail Pocket
Bottom
Rail Plug
Bottom
Rail Plug
