10
Microphone DM80
The easiest way to get the same code key in the whole Digisystem is to
generate a new code key from the combined unit; in that way the built-in
receiver gets the same code as the rest of the system.
Bluetooth
Here you can activate Bluetooth to be able to pair the Microphone DM80 with
a telephone or mobile.
For detailed user information, see chapter
More Functions - Bluetooth
.
Telephone
Under the Telephone menu you can configure the DM80 to function as a
telephone headset.
Connect the DM80 to the telephone's multifunction socket via the headset
cable supplied.
Please note:
When the headset cable is connected to the DM80, the built-in
microphone is switched off and only works when a phone call is made.
To activate the telephone function, enter the menu under Communication -
Phone - Enable (Press shortly the menu control; a green tick shows that the
telephone function was activated and a small telephone shows in the down
left corner of the main display.
Use your telephone as usual; the voice of the person you are talking to is
transferred via the cable to the DM80; from there it is sent wirelessly to your
Digisystem receiver.
-
In level
adjusts the level of incoming sound level for telephony (not BT).
This level can also be adjusted using the menu control when the headset
cable is connected. The change of volume is shown on the display.
-
Out level
adjusts the level of outgoing sound level for telephony (not BT).
-
Mic mode
: here you can preset the desired microphone mode for telephony
(not BT) (default setting is zoom).
Inputs
Here you can select what the multifunction socket is to be used for.
-
External Mic
(for external microphone, e.g. clip-on microphone)
-
Line in
(for, e.g., a TV or computer cable)
-
Telephone
activates the socket on the DM80 for use as a headset. Same
function as
Activate
in the
Communication - Telephone
menu.
The level of the External mic or Line in can also be adjusted in this menu.
