507713-01
Page 24 of 32
Issue 1623
FAILURE CODES
Figure 34
Integrated Control
(Automatic Hot Surface Ignition System)
Integrated Control Diagnostic Codes
NOTE:
This control is equipped with a push button switch
for diagnostic code recall. The control stores the last 5 fault
codes in non-volatile memorty. The most recent fault code
is flashed first, the oldest fault code is flashed last. There is
a 2 second pause between codes. When the push button
switch is pressed for less than 5 seconds, the control will
flash the stored fault codes when the switch is released.
The fault code history may be cleared by pressing the push
button switch for more than 5 seconds.
Figure 33
