Owner’s Manual -
30” Metal Fixed Pedestal Fan
2
SAFETY INFORMATION
WARNING
1. Read and save these instructions. Do not operate fan unless you have read these instructions.
2. Unplug the fan before moving it or performing maintenance. Do not touch the fan when your hands are wet.
3. Those who are not qualified electricians should not disassemble, repair or rebuild the fan.
4. Unplug the fan when it is not in use.
5. DO NOT unplug the fan by pulling the power cord. Unplug by holding the plug and pulling.
6. DO NOT use the fan when there is damage to the power cord or plug. If the supply cord is damaged, it has
to be replaced by the manufacturer, its service agent or similarly qualified persons.
7. DO NOT use the fan with extension cord.
8. DO NOT use the fan close to fires.
9. DO NOT insert your hand or other objects into the grille or the movable parts.
10. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
11. DO NOT use this fan outdoors, this fan is designed for indoor use only.
CAUTION
1. Unplug the fan from the socket and clean it with a soft cloth.
2. DO NOT immerse the fan.
3. Fit the guard onto fan before starting up the fan.
4. This fan is not intended for use by people (including children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge unless they have been given supervision or instruction
concerning use of the fan by a person responsible for their safety. Supervise children to ensure they do not
play with the fan.
CARE AND MAINTENANCE
Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces. Slightly moisten a cloth
and then wipe off the surfaces of the fan. In order to remove the dust from the grill, use a vacuum cleaner or
remove the front grill by removing the securing screw on the edge of the grill with a screwdriver. After cleaning,
remount the grill. Reinstall and tighten the screws on the edge of the grill.
ASSEMBLY INSTRUCTIONS
Remove the base from the fan head by removing
the screws
1.
Loosen the height adjusting
knob on the standing pole.
Then pull the upper portion
of the standing pole to the
desired height and re-tighten
the adjusting knob.
2.
ASSEMBLY INSTRUCTION
1. Remove the base from the fan
head by removing the screws.
2. Loosen the height adjusting knob
on the standing pole. Then pull
the upper portion of the standing
pole to the desired height and
re-tighten the adjusting knob.
3. Insert the spring into the bottom
of the standing pole. Then attach
the standing pole to the base
using the screws.
4. Place the fan head on top of the
standing pole and secure in place
using the long bolt and nut.
2
A
ASSEMBLY INSTRUCTION
1. Remove the base from the fan
head by removing the screws.
2. Loosen the height adjusting knob
on the standing pole. Then pull
the upper portion of the standing
pole to the desired height and
re-tighten the adjusting knob.
3. Insert the spring into the bottom
of the standing pole. Then attach
the standing pole to the base
using the screws.
4. Place the fan head on top of the
standing pole and secure in place
using the long bolt and nut.
2
A
