Owner’s Manual -
B-VMH18,24UU-1
5
This manual does not include Remote Controller
Operations, see the<<Remote Controller Owner's
manual>> packed with the unit for details.
Use the system in the following temperature for safe and
effective operation. The Max operation temperature for
the air conditioner.(Cooling/Heating)
3. AIR CONDITIONER OPERATIONS AND
PERFORMANCE
NOTE
Table 3-1
0°C ~ 30°C / 32 °F~86°F
17°C ~ 32°C
( 62 °F ~ 90°F)
17°C ~ 32°C
( 62 °F ~ 90°F)
Cooling operation
Drying operation
Heating operation
(cooling only type without)
Mode
Temperature
Outdoor
temperature
(for the models with low
temperature cooling system)
temperature
Room
0°C ~ 50°C / 32 °F~122°F
0°C ~ 50°C / 32 °F~122°F
-15°C ~ 50°C / 5 °F~122°F
-15°C ~ 24°C / 5 °F~76°F
Infrared signal receiver
Operation lamp
Timer indicator
Alarm indicator
Temporary button
Temperature indecator
PRE-DEF indicator(cooling and heating
type)
or fan only indicator(cooling only type)
Infrared signal receiver
Operation lamp
Timer indicator
Alarm indicator
Temporary button
Temperature indecator
PRE-DEF indicator(cooling and heating
type)
or fan only indicator(cooling only type)
Temperature indecator
1
If air conditioner is used outside the above conditions, it may
cause the unit to function abnormally.
The phenomenon is normal that the surface of air
conditioning may condense water when the relative
humidity in room
is abnormally high
, please close the door and
window.
Optimum performance will be achieved within these
operating temperature range.
2
3
NOTE
FORCED AUTO
The OPERATION lamp is lit, and the air conditioner will run
under FORCED AUTO mode. The remote controller operation is
enabled to operate according to the received signal.
1
FORCED
COOL
The OPERATION lamp flashes, the air conditioner will turn to
FORCED AUTO after it is enforced to cool with a wind speed of
HIGH for 30 minutes. The remote controller operation is
disabled.
OFF
The OPERATION lamp goes off. The air conditioner is OFF
while the remote controller operation is enabled.
2
3
For inverter type,this switch is used for after-sales service
purpose only,the user should not push it.
For fixed-frequency type,
this function is used to operate the unit
temporarily in case you misplace the remote controller or its
batteries are exhausted. Two modes including
FORCED
AUTO and FORCED COOL can be selected through the
TEMPORARY BUTTON on the air-in grill control box of the
indoor unit. Once you push this button, the air conditioner will
run in such order:
FORCED
AUTO, FORCED COOL, OFF,
and back to
FORCED
AUTO.
Display panel
Fig. 2-5
Display panel
Fig. 2-6
Display panel
Fig. 2-7
Display panel
Fig. 2-4
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
Infrared signal receiver
Infrared signal receiver
MANUAL
TIMER
ALARM
OPERATION
MANUAL
TIMER
ALARM
OPERATION
DEF./FAN
MANUAL
MANUAL
TIMER
ALARM
OPERATION
DEF./FAN
DEF./FAN
Infrared signal receiver
Display panel
Fig. 2-8
